Flag of Ukraine
SymfonyCasts stands united with the people of Ukraine
This tutorial has a new version, check it out!

Behat and Mink

Keep on Learning!

If you liked what you've learned so far, dive in!
Subscribe to get access to this tutorial plus
video, code and script downloads.

Start your All-Access Pass
Buy just this tutorial for $12.00

Behat + Mink

Now that you’re dangerous with Behat and an absolute expert in Mink, let’s put them together!

Behat has a plugin system called “extensions”, and we’ll install a MinkExtension, which makes Behat and Mink play together like best friends! On the MinkExtension Documentation Page, copy the composer.json entry, paste it into your file, and then run php composer.phar update behat/mink-extension to download the new library.

One thing we haven’t mentioned yet is Behat configuration. By default, it assumes a lot of things - like that our features live in a features/ directory and that the FeatureContext class is found in features/bootstrap/. To configure this and a lot more, you can create a behat.yml file in the root of your project or in a config/ directory. We need this file now because it’s used to activate Behat extensions, like our MinkExtension. Copy the base configuration from the MinkExtension documents and also add another selenium2 line. This activates it and says that we’ll be using the goutte and selenium2 drivers. For now, remove the base_url line.

Note

If you’re using Behat in Symfony2, you should also install the Symfony2Extension and activate it here.

Accessing Mink and Built-in Definitions

Our goal is to get access to the Mink Session object from within our FeatureContext class. If we did that, we could write Behat steps like Given I go to "/contact" and very easily use Mink to command the browser accordingly. The MinkExtension helps us do this, but gives us a few options.

First, we can simply implement the MinkAwareInterface. This forces us to have two methods:: setMink and setMinkParameters. The Mink object is a container that holds a pre-built Session, and if we set it an a private property, we could access the Session later. When Behat starts, the MinkExtension looks to see if our FeatureContext class implements this interface. If it does, it calls setMink and passes us exactly what we need.

If you think that’s too much work, it’s your lucky day! The second option is to extend the RawMinkContext class, which implements this interface for you and gives you some nice shortcut methods like getSession.

But wait there’s more! Before we look at the third option, go to the command line and ask Behat to print out the current list of all built-in definitions:

php bin/behat -dl

Not surprisingly, it prints out the few custom definitions that we wrote earlier to test the ls command, but nothing else. Finally, make your FeatureContext extend MinkContext. This has all the niceness of RawMinkContext, but with one big surprise. Print your definitions again to see that we’ve suddenly inherited a long list of really useful statements like Given I am on and When I fill in "label" with "value". We just got a bunch of awesome free stuff.

So where did all this free stuff come from? The answer is in the MinkContext class that we just extended. If you open this up, you’ll see all the regular expressions and functions that fuel these. This is a great place to look if you’re writing a custom definition and want some help on exactly how to accomplish something.

Adding Web Scenarios

Let’s copy in the first scenario that we wrote all the way back in chapter 1. For now, use the full URL to Wikipedia. We’ll fix this in a few minutes. Just like before, the scenario passes without writing any custom step definitions, and now it makes sense why: every step in our scenario matches up with one of the regular expressions that we inherited.

Let’s try another scenario. Suppose someone says to you:

>If you are on the main page and you fill in the search field with >”Tyrannosaurus Bill” and press “search”, then you should see “Search results”

Since Tyrannosaurus’s name is Rex and not Bill, this scenario outlines what happens when you search for an article that doesn’t exist. This time, the scenario is super-quick to write.

Scenario: Searching for a page that does NOT exist
  Given I am on "http://en.wikipedia.org/wiki/Main_Page"
  When I fill in "search" with "Tyrannosaurus Bill"
  And I press "searchButton"
  Then I should see "Search results"

And once again, without any PHP code, our scenario passes.

Background and Scenario Outline

Two scenarios and no code yet, we’re doing great! Let’s clean up a few things by reducing duplication. First, use the Background strategy we learned earlier to remove the identical Given step on each scenario.

Feature: Search
  # ...

  Background:
    Given I am on "http://en.wikipedia.org/wiki/Main_Page"

  Scenario: Searching for a page that does exist
    When I fill in "search" with "Velociraptor"
    And I press "searchButton"
    Then I should see "an enlarged sickle-shaped claw"

  Scenario: Searching for a page that does NOT exist
    When I fill in "search" with "Tyrannosaurus Bill"
    And I press "searchButton"
    Then I should see "Search results"

Besides the Given part, the remainder of the scenarios are also very similar. In these cases, we can leverage something called “Scenario Outlines”. This Behat shortcut basically lets you replace any part of a scenario with a variable. If we replace the search term and the expectation with variables, then we can use a table to collapse our two scenarios into a single scenario outline. As an extra bonus, some editors will even clean up your tables for you.

Background:
  Given I am on "http://en.wikipedia.org/wiki/Main_Page"

Scenario Outline: Searching for a specific page
  When I fill in "search" with "<search>"
  And I press "searchButton"
  Then I should see "<expectation>"

  Examples:
    | search             | expectation                      |
    | Velociraptor       | an enlarged sickle-shaped claw   |
    | Tyrannosaurus Bill | Search results                   |

When we execute the feature, it looks a little different, but passes just like before. Use “Scenario Outlines” whenever you want to test a number of similar user interactions and outcomes.

behat.yml: base_url, Parameters, and Profiles

The domain is not part of the behavior that we’re describing or testing and could change depending on if we’re testing locally or on a staging server. In other words, let’s get it out of our feature file!

Background:
  Given I am on "/wiki/Main_Page"

The secret to doing this is in the behat.yml file under a key called base_url. By putting the domain here, it will be automatically prefixed to our URLs.

default:
  extensions:
    Behat\MinkExtension\Extension:
      goutte:    ~
      selenium2: ~
      base_url: http://en.wikipedia.org/

But this isn’t magic, in fact this trick is done quite simply. First, any value you put here is available in your FeatureContext class by calling the getMinkParameter function:

/** @BeforeScenario */
public function beforeScenario()
{
    var_dump($this->getMinkParameter('base_url'));
}

Open up the MinkContext class again and notice that every reference to a URL is first passed to a locatePath function. This function holds the magic behind how the base_url works, and as you can see, it’s actually really simple. Whenever you refer to a URL in your FeatureContext, just remember to wrap the URL in this function. And if you want even more magic, you can always override this function and add whatever magic you want.

If you’re curious about what other MinkExtension options are available, check out its documentation. Alternatively, if you open a class called Extension inside the library, you’ll find a large configuration tree that highlights all of the possible values, including less-known capabilities like telling Selenium2 all of your desired capabilities.

behat.yml Parameters and Profiles

If you want to pass your own configuration into Behat, you can do that beneath a different key: context and parameters. In this spot, you can pass whatever you want.

default:
  context:
    parameters:
      foo: bar
      important_things: [one, two, apple]

  extensions:
    # ...

The values are passed into the constructor of the FeatureContext class, which you can store as properties and use later however you want:

private $fooConfig;

public function __construct(array $parameters)
{
  $this->fooConfig = $parameters['foo'];
}

To see what other meaningful options you can pass beneath context, see the behat.yml part of the documentation.

There’s also another trick called profiles. We could use it to redefine the base_url value, for example.

default:
  extensions:
    Behat\MinkExtension\Extension:
      base_url: http://en.wikipedia.org/
      # ...

fr:
  extensions:
    Behat\MinkExtension\Extension:
      base_url: http://fr.wikipedia.org/

Tip

Every profile inherits the configuration from the default profile and then overrides it.

To execute a test with a certain profile, just use the p option.

php bin/behat -p fr

The French Wikipedia is a bit different so the test fails, but you get the idea.

Implementation Details: don’t include CSS Selectors!

We have one big problem still with our scenario: we’re referring to both the search box and the search button by their HTML name attribute. This is a very bad practice, because this isn’t something that our user can see, it’s an implementation detail that might change during development. These invisible changes aren’t behavior changes, so our feature shouldn’t need to change. Including CSS or other technical details is very common for beginners, but a very bad practice. Fortunately, it’s easy to fix!

Replace the two offending lines with natural language that the user might actually say. Since there isn’t any text on the button, a natural way to express these are When I fill in the search box with "<search>" and And I press the search button. These aren’t built-in definitions, I’m just inventing what sounds natural.

# ...

Scenario Outline: Searching for a specific page
  When I fill in the search box with "<search>"
  And I press the search button
  Then I should see "<expectation>"

  Examples:
    # ...

Execute Behat so that it will give us the code snippets we need to fill in. In fact, by using the --append-snippets flag, Behat will append the code blocks for us. Just when you thought we couldn’t get lazier, another shortcut!

php bin/behat features/search.feature --append-snippets

To fill in these methods, we have two options: let’s do the hard way first. The Mink Session is available by saying $this->getSession() and the page via $this->getSession()->getPage(). Since you’ll need the page all the time, let’s go ahead and make a shortcut method to get it. I’m being careful with my PHPDoc so that my IDE gives me autocomplete:

/**
 * @return \Behat\Mink\Element\DocumentElement
 */
protected function getPage()
{
    return $this->getSession()->getPage();
}

Back to work! We can use CSS to find the search box by using the find method. Alternatively, we can use the named selector by taking advantage of the findField shortcut method. Once we have the field, just call setValue on it:

/**
 * @When /^I fill in the search box with "([^"]*)"$/
 */
public function iFillInTheSearchBoxWith($searchTerm)
{
    $ele = $this->getPage()->findField('search');
    $ele->setValue($searchTerm);
}

For the button, we’ll use the findButton method and then call press on it:

/**
 * @Given /^I press the search button$/
 */
public function iPressTheSearchButton()
{
    $this->getPage()->findButton('searchButton')->press();
}

Notice that with both of these, it’s ok to include CSS selectors and other technical details inside the FeatureContext class. We only want to hide them from the Feature file, which should describe the features behavior at the technical level of our user.

It works! One great thing about this is that we can use these new definitions on all of our future scenarios: we only have to do this work once.

Metasteps

As easy as that last step was for such a Mink expert, there’s an even easier solution: metasteps. Metasteps let us use Gherkin language right inside a custom step definition. Get rid of all of that Mink code, create a new instance of a When object, and re-use the same Gherkin step language we had earlier. There are also Given and Then classes, but all three do the exact same thing, so use whichever you want:

// ...
use Behat\Behat\Context\Step\Given;
use Behat\Behat\Context\Step\When;
use Behat\Behat\Context\Step\Then;

// ...

public function iFillInTheSearchBoxWith($searchTerm)
{
    return new When(sprintf(
        'I fill in "search" with "%s"',
        $searchTerm
    ));
}

public function iPressTheSearchButton()
{
    return new When('I press "searchButton"')
}

Metasteps are a really simple way to take the technical stuff out of your Feature without needing to write any real code.

But they’re also very useful in another situation. Imagine for a second that we need to login, so we write something like Given I am logged in.

Background:
  Given I am on "http://en.wikipedia.org/wiki/Main_Page"
  And I am logged in

In reality, logging requires several steps, but we don’t want to repeat these on each scenario: we don’t care how you login, we only care that it happens.

In this case, metasteps become very useful because you can actually return a whole array of steps that should be executed:

/**
 * @Given /^I am logged in$/
 */
public function iAmLoggedIn()
{
    return array(
        new Given('I am on "login"'),
        new Given('I fill in "Username" with "Ryan"'),
        new Given('I fill in "Password" with "foobar"'),
        new Given('I press "Login"'),
    );
}

By writing one simple step in a scenario, you can trigger a whole group of actions to be taken. Use this often for your most commonly needed tasks. And just like with the Gherkin scenarios, there is no difference between using Given, When or Then: use whichever one sounds most natural to you.

Leave a comment!

1
Login or Register to join the conversation

Hey Josh,

I think it's not so bad, but looks wrong and ridiculous. It could be a possible bug in annotation plugin - try to update PhpStorm itself and then annotation plugin to the latest stable version.

BTW, try to exclude cache directory in PhpStorm: right click on the "var/" directory (or "app/cache/" - it depends on Symfony version) => "Mark Directory as" => "Excluded". The same for "src/", right click on it => "Mark Directory as" => but choose "Source Root" now. Restart you PhpStorm and it should help.

Cheers!

Reply
Cat in space

"Houston: no signs of life"
Start the conversation!

What PHP libraries does this tutorial use?

// composer.json
{
    "require": {
        "symfony/symfony": "^2.7", // v2.7.4
        "twig/twig": "^1.22", // v1.22.1
        "sensio/framework-extra-bundle": "^3.0", // v3.0.10
        "doctrine/doctrine-bundle": "^1.5", // v1.5.1
        "doctrine/orm": "^2.5" // v2.5.1
    },
    "require-dev": {
        "behat/mink-extension": "^2.0", // v2.0.1
        "behat/mink-goutte-driver": "^1.1", // v1.1.0
        "behat/mink-selenium2-driver": "^1.2", // v1.2.0
        "phpunit/phpunit": "^4.8" // 4.8.7
    }
}
userVoice